NUT-SCANNER(8) NUT Manual NUT-SCANNER(8) (NAME) nut-scanner - NUT (SYNOPSIS) nut-scanner -h nut-scanner [] (DESCRIPTION) nut-scanner NUT . nut-scanner ups.conf . (INSTALLATION) nut-scanner libltdl ( libtool) . (USB SNMP IPMI UPower ...) . Net-SNMP libsnmp ( *.so *.dll) SNMP . UPower GDBus/libgio . (OPTIONS) -h . (DISPLAY OPTIONS) -Q | --disp_nut_conf_with_sanity_check ups.conf (). -N | --disp_nut_conf ups.conf. -P | --disp_parsable . (BUS OPTIONS) -C | --complete_scan ( ). -U | --usb_scan USB NUT . USB : +----------------+---------------------------+ | | | | | | +----------------+---------------------------+ |-U | | | | | | | `bus`/`device`/`busport` | +----------------+---------------------------+ |-UU | `bus` | | | `busport` | | | | +----------------+---------------------------+ |-UUU | | | | | | | `bus`/`device`/`busport` | +----------------+---------------------------+ |-UUUU | | | | | | | `bus`/`device`/`busport` | | | `bcdDevice` | | | ( | | | | | | ) | +----------------+---------------------------+ . -S | --snmp_scan SNMP. start IP end IP . SNMP . -M | --xml_scan XML/HTTP. () (broadcast) XML/HTTP . IP . IP . -O | --oldnut_scan NUT ( upsd) IP start IP end IP. -n | --nut_simulation_scan NUT ( dev. "sysconfig"). NUT_CONFPATH . -A | --avahi_scan NUT Avahi () . IP . -I | --ipmi_scan NUT IPMI IP . -J | --upower_scan UPower. GDBus/libgio . -E | --eaton_serial serial ports Eaton ( XCP SHUT) . . serial ports : o auto . o (0 () /dev/ttyS0 /dev/ttyUSB0 1 COM1 a /dev/ttya ...). o N X-Y X Y . o . o /dev/ttyS1,/dev/ttyS4. (NETWORK OPTIONS) ( SNMP NetXML IPMI "Old NUT") IP ( IPv4 IPv6) IP . -s -e ( ) . -s -e IP . -m -s -e IP . <<>> . IP . CIDR IP <<>> . () IP ( nut-scanner ). . IP . . IPv6 . -t | --timeout timeout . . -s | --start_ip start IP IP (IPv4 IPv6) IP (SNMP old_nut) (XML/HTTP). -e | --end_ip end IP IP (IPv4 IPv6) IP (SNMP old_nut) (XML/HTTP). start IP . end IP start IP . -m | --mask_cidr IP address/mask IP CIDR. -m auto nut-scanner () IP () -m auto4 -m auto6 IPv4 IPv6 . "auto*" . /ADDRLEN ( ). IPv4 LAN 10.2.3.0/24 (32-24)=8 . IPv6 /64 NUT/SNMP/NetXML/... ( ) . 8 . NUT (NUT DEVICE OPTION) -p | --port port number NUT ( 3493). SNMP V1 (SNMP V1 OPTION) -c | --community community SNMP v1 ( = public). SNMP V3 (SNMP V3 OPTIONS) -l | --secLevel security level security level SNMPv3. : noAuthNoPriv authNoPriv authPriv. . -u | --secName security name security name SNMPv3. security level . -w | --authProtocol authentication protocol authentication protocol SNMPv3. MD5 SHA SHA256 SHA384 SHA512 ( Net-SNMP nut-scanner ). MD5 . -W | --authPassword authentication pass phrase authentication pass phrase SNMPv3. security level authNoPriv authPriv . -x | --privProtocol privacy protocol privacy protocol SNMPv3. DES AES AES192 AES256 ( Net-SNMP nut-scanner ). DES . -X | --privPassword privacy pass phrase privacy pass phrase SNMPv3. security level authPriv . IPMI (IPMI OPTIONS) -b | --username username IPMI LAN ( IPMI LAN . ). -B | --password password ( IPMI LAN . ). -d | --authType authentication type IPMI 1.5 ( NONE STRAIGHT_PASSWORD_KEY MD2 MD5) (=MD5). IPMI lan IPMI 1.5 . -L | --cipher_suite_id cipher suite identifier (cipher suite) IPMI 2.0 . Cipher Suite IPMI 2.0 . (payload) (=3). ( ): o 0: None; None; None o 1: HMAC-SHA1; None; None o 2: HMAC-SHA1; HMAC-SHA1-96; None o 3: HMAC-SHA1; HMAC-SHA1-96; AES-CBC-128 o 6: HMAC-MD5; None; None o 7: HMAC-MD5; HMAC-MD5-128; None o 8: HMAC-MD5; HMAC-MD5-128; AES-CBC-128 o 11: HMAC-MD5; MD5-128; None o 12: HMAC-MD5; MD5-128; AES-CBC-128 o 15: HMAC-SHA256; None; None o 16: HMAC-SHA256; HMAC_SHA256_128; None o 17: HMAC-SHA256; HMAC_SHA256_128; AES-CBC-128 (MISCELLANEOUS OPTIONS) -V | --version NUT. -a | --available nut-scanner ( OLDNUT USB SNMP XML AVAHI IPMI). -q | --quiet . . -D | --nut_debug_level . . nut-scanner . nut-scanner . . (EXAMPLES) USB: :; nut-scanner -U [nutdev-usb1] driver = "snmp-ups" port = "192.168.0.42" SNMP v1 public () 192.168.0.0 192.168.0.255: :; nut-scanner -S -s 192.168.0.0 -e 192.168.0.255 [nutdev-snmp1] driver = "snmp-ups" port = "192.168.0.42" CIDR: :; nut-scanner -S -m 192.168.0.0/24 [nutdev-snmp1] driver = "snmp-ups" port = "192.168.0.42" NUT 10 IP 192.168.0.0 192.168.0.127 CIDR: :; nut-scanner -O -t 10 -m 192.168.0.0/25 [nutdev-nut1] driver = "dummy-ups" port = "dummy-test@192.168.1.28" IPMI ( 1.5) 192.168.0.0 192.168.0.255 CIDR: :; nut-scanner -I -m 192.168.0.0/24 -b username -B password Eaton 0 1 (/dev/ttyS0 /dev/ttyUSB0 /dev/ttyS1 /dev/ttyUSB1 ): :; nut-scanner --eaton_serial 0-1 Eaton 1 2 (COM1 COM2 ): :; nut-scanner --eaton_serial 1-2 UPower: :; nut-scanner -J [nutdev-upower1] driver = "upower" port = "/org/freedesktop/UPower/devices/ups_hiddev0" vendor = "APC" product = "Back-UPS ES 700G" serial = "5B1234567890" bus = "upower" (SEE ALSO) ups.conf(5) : NUT (Network UPS Tools): https://www.networkupstools.org/historic/v2.8.5 Network UPS Tools 2.8.5 06/21/2026 NUT-SCANNER(8)