TRACE-CMD-START(1)             libtracefs Manual            TRACE-CMD-START(1)

نام (NAME)
       trace-cmd-start - start the Ftrace Linux kernel tracer without
       recording

خلاصه دستور (SYNOPSIS)
       trace-cmd start [OPTIONS]

توضیحات (DESCRIPTION)
       The trace-cmd(1) start enables all the Ftrace tracing the same way
       trace-cmd-record(1) does. The difference is that it does not run
       threads to create a trace.dat file. This is useful just to enable
       Ftrace and you are only interested in the trace after some event has
       occurred and the trace is stopped. Then the trace can be read straight
       from the Ftrace pseudo file system or can be extracted with
       trace-cmd-extract(1).

گزینه‌ها (OPTIONS)
       The options are the same as trace-cmd-record(1), except that it does
       not take options specific to recording (-s, -o, -N, and -t).

       --fork
           This option is only available for trace-cmd start. It tells
           trace-cmd to not wait for the process to finish before returning.
           With this option, trace-cmd start will return right after it forks
           the process on the command line. This option only has an effect if
           trace-cmd start also executes a command.

همچنین ببینید (SEE ALSO)
       trace-cmd(1), trace-cmd-record(1), trace-cmd-report(1),
       trace-cmd-stop(1), trace-cmd-extract(1), trace-cmd-reset(1),
       trace-cmd-split(1), trace-cmd-list(1), trace-cmd-listen(1)

نویسنده (AUTHOR)
       Written by Steven Rostedt, <rostedt@goodmis.org[1]>

RESOURCES
       https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/

کپی‌رایت و تکثیر (COPYING)
       Copyright (C) 2010 Red Hat, Inc. Free use of this software is granted
       under the terms of the GNU Public License (GPL).

نکات (NOTES)
        1. rostedt@goodmis.org
           mailto:rostedt@goodmis.org

libtracefs                        03/09/2026                TRACE-CMD-START(1)